The most popular China has steadily become the wor

2022-08-04
  • Detail

The development of China's plastics industry is crucial to the growth of a country's GDP. For a long time, each country has used the quantitative index of per capita plastic consumption to measure and reflect the economic strength of a country. However, the rapid development of China's plastic market is closely related to the rapid development of related industries. At the same time, China's plastics industry has steadily become the largest consumer of the global plastics industry under the stimulation of policies such as the sending of automobiles to the countryside, the sending of household appliances to the countryside and the exchange of old for new, as well as the overall demand of the Chinese market and the partial recovery of the global market

China has steadily become the world's largest consumer of plastics

China is the main consumer market of German plastics and rubber and plastic machinery

plastics, as a rapidly developing new material, has become an indispensable material in daily life and industrial fields after just over 100 years of development. In the tide of global low-carbon economic development, plastics will once again play an important role. In recent years, due to the impact of the economic crisis, the European market, the traditional economic lifeline, has been lack of power. On the contrary, with the rise of emerging economies such as China and India, the Asian market has shown strong development momentum in various fields, becoming the "barometer" of the global economic market and tightening the "power valve" of the growth of the global plastic market

in 2009, more than 1/3 of the plastic machinery equipment exported by Germany was exported to Asia. The chairman of the rubber and plastic machinery and equipment branch under VDMA pointed out that in Asia, the demand for plastic machinery and equipment varies with the development of different regions. At the same time, according to the report of VDMA plastic and Rubber Machinery Association, China once again became the top sales market of German plastic and rubber machinery in 2010. At the same time, European rubber and plastic machinery undoubtedly played an extremely important role in the development of the global rubber and plastic industry. Similarly, the European rubber and plastic machinery market is also very sensitive to the development of the global industry

it is reported that according to the industry report released by VDMA German plastics and Rubber Machinery Association on may27,2010, the German rubber and plastic machinery manufacturing industry is expected to grow by about 11% in 2011. The report emphasizes that this market growth mainly comes from external demand, especially the Chinese market. However, on september2,2010, VDMA rubber and plastic machinery equipment manufacturers must test the system. Ulrichreifenhuser, chairman of the association, said confidently: "no one can predict that the orders of the industry have increased by a record 85% in the first six months of this year. Such an extraordinary performance gives people no reason to be optimistic. Since September 2009, new orders have been increasing rapidly every month. In fact, in June 2010, they exceeded 100%."

at the press conference held during k2010, bernhardmerki, the current president of EUROMAP, said, "based on the rapid increase in the market demand for rubber and plastic equipment in all EU EUROMAP member countries, the growth in 2010 will reach% According to EUROMAP, the order sources are mainly driven by the European and Asian markets, especially the Chinese market, while the demand of the Brazilian and Mexican markets is also rising rapidly

from June to the end of 2010, at different press conferences, from the association to leading equipment and raw material suppliers in the industry, when talking about the performance development in 2010, the author heard the most: "the biggest driving force is in the Asian market, especially the Chinese market"

in fact, from the outbreak of the entire financial crisis to the improvement of the global market in 2010, the rapid development of China's plastic processing market has confirmed the importance of the Chinese market

according to the statistics of the China Bureau of statistics, the cumulative output of plastic products in 2010 was 45.471 million tons, a year-on-year increase of 20.5%, exceeding the annual output of last year. In 2009, China's plastic products industry still had double-digit growth compared with 2008. In 2010, the cumulative output reached 51.457 million tons, a year-on-year increase of 20.9% compared with 2009

according to the data provided by China Plastics Machinery Industry Association, the total output value of China's plastics machinery manufacturing industry in the first three quarters of 2010 was 30.129 billion yuan, an increase of 72.93% year-on-year. This growth was achieved when Chinese injection molding machine suppliers were subject to Indian anti-dumping at the beginning of the year

China is the main consumer market of plastic and rubber plastic machinery in Germany

domestic plastic supply and demand in China

from the perspective of domestic supply, the actual output of PE resin in China in 2010 was 8.41 million tons, down 3.45% year-on-year. With the impact of domestic plastic restrictions and the financial crisis, as well as domestic restrictions on the production capacity investment of high energy consumption and high pollution enterprises, the growth rate of domestic output has begun to slow down. In terms of the import situation in 2010, different from the substantial growth in previous years, it maintained a steady growth trend on the whole. On the one hand, the domestic production capacity continues to increase, and the self-sufficiency rate has been improved. On the other hand, with the increasing production costs of foreign products, the cost advantage of imported products is gradually declining. In addition, high-quality and professional materials are still mainly imported, and the average import price is also rising steadily. The domestic production capacity is growing, the supply capacity is enhanced, and the external dependence is shrinking. In the future, the market competition will pay more attention to the control of production costs and the improvement of product quality

at the same time, from the analysis of domestic demand, with the rapid development of China's economy, the growth of China's consumption of plastics is also accelerating. Since 2009, China's PE consumption has reached more than 14million tons, making it the world's largest PE resin consumer. The total consumption is 44% higher than that of the United States and 14% higher than that of Europe. However, in terms of per capita PE consumption, it is only three times the service life of the United States, and there is still a lot of room for development in the future. Therefore, looking into the future, we believe that the impact of developed countries on the demand for petrochemical products will be more and more limited, and the emerging economies represented by China will become the main force driving the demand for PE resin

it is reported that in 2010, China's per capita plastic consumption was about 46kg, only 1/3 of that of developed countries, which indicates that China's plastic products industry will still maintain rapid development during the "12th Five Year Plan"; Under the inevitable trend of "replacing steel with plastics" and "replacing wood with plastics", the engineering plastic products industry is expected to maintain an average annual market growth rate of 15% during the "12th Five Year Plan" period. It is conceivable that plastic molds, which account for the highest proportion in the total number of molds, will also develop at a high growth rate during the "12th Five Year Plan" period

according to sudongping, Secretary General of China Plastics Machinery Association, from January to February, China exported 8615 plastic machinery products with 10 major tax codes, such as injection molding machines, plastic granulators and plastic hollow molding machines, to 136 countries and regions, with an export amount of US $194668900. Compared with the same period last year, the export volume and export amount increased by 16% and 24% respectively. However, in the same period, China imported 1714 plastic machine products of top 10 tax codes, with an import amount of USD 334.313 million. The import volume increased by 5% year-on-year, the import amount increased by 33% year-on-year, and the trade deficit was USD 139.6324 million, an increase of 46% year-on-year

in general, the new capacity of the main engine in 2011 may only come from the technical transformation of some existing equipment. In terms of demand, although the rapid growth stage of China's plastic consumption has passed, under the background of urbanization and expanding domestic demand, the plastic demand is still expected to maintain an annual growth rate of 5%-10%. This will lead to a considerable gap between supply and demand in 2011. Because if the company produces in China, the author believes that it is an inevitable trend for China to become the largest consumer in the global plastic industry

note: the reprinted contents are indicated with the source. The reprint is for the purpose of transmitting more information, and does not mean to agree with their views or confirm the authenticity of their contents

Copyright © 2011 JIN SHI